Basic Introduction
There Are Many Kinds Of Rivets, According To The Use Of Divided Into: Hollow, Solid, Half Hollow, Core Pulling, Core Percussion……. Etc., Geographical Restrictions Have Also Produced A Lot Of Local Names, But In The Specification, It Should Be Noted In Detail: Head Shape Diameter * Head Thickness * Pipe Diameter * Length (not Including Head Thickness) * Aperture * Hole Depth, Usually, Aperture And Depth Already Have Standards Can Be Omitted, If You Do Not Have Drawings Or Pictures, You Should Include These Elements, And Then Inform The Material, You Can Basically Direct Production.
Hollow Rivets Are Usually Used In Clothing, Footwear And Other Industries, Solid Rivets Need To Be Riveted Again, Used For Heavy Parts Connection, Often For Non-detachable Structure, Semi-hollow Rivets Are The Most Widely Used, Bunched Mouth (wire Diameter Tail Is Smaller) Nail Using Hard Wire Manufacturing, Can Penetrate The Steel Plate Without Prehole 0.5mm Thickness, Rivet Can Not Bend Deformation, Widely Used In The Code Box, In Suitcases And Military Cases, Hollow Nails (semi-hollow Rivets) Are Made Of Soft Wire, Which Cannot Be Cracked After Rivet Opening. There Are Many Types. Now, The Shaft On Some Toys Has Begun To Be Replaced By Semi-hollow Nails Or Mother-child Nails In A Large Area, Which Can Greatly Reduce Production Costs. Core-pulling And Core-striking Rivets Are Mostly Used For Riveting Thin Soft Materials, And The General Requirements Are Not Strict. The Manufacturing Materials Are Usually Produced With Good Plastic Materials.
Purpose Of Use
Hollow Rivets Are Usually Used In Clothing, Footwear And Other Industries, Solid Rivets Need To Be Riveted Again, Used For Heavy Parts Connection, Often For Non-detachable Structure, Semi-hollow Rivets Are The Most Widely Used, Bunched Mouth (wire Diameter Tail Is Smaller) Nail Using Hard Wire Manufacturing, Can Penetrate The Steel Plate Without Prehole 0.5mm Thickness, Rivet Can Not Bend Deformation, Widely Used In The Code Box, In Suitcases And Military Cases, Hollow Nails (semi-hollow Rivets) Are Made Of Soft Wire, Which Cannot Be Cracked After Rivet Opening. There Are Many Types. Now, The Shaft On Some Toys Has Begun To Be Replaced By Semi-hollow Nails Or Mother-child Nails In A Large Area, Which Can Greatly Reduce Production Costs. Core-pulling And Core-striking Rivets Are Mostly Used For Riveting Thin Soft Materials, And The General Requirements Are Not Strict. The Manufacturing Materials Are Usually Produced With Good Plastic Materials
