First, Press The Button How To Install Themselves
- According To The Size Of The Button, Cut Two Holes In The Place Where The Button Needs To Be Nailed And Pressed, And Put One Button In It.
- Put The Gasket On It And Press It Firmly With A Hard Object.
3, On The Contrary To The Buckle, Concave In The Door Flap, Convex In The Flap. When Thin Cloth Is Encountered, Non-woven Lining Should Be Affixed To The Position Where The Seam Is Opened To Strengthen The Fastness.
- When Sewing, Avoid The Place With Open Line And Seam Head Drop.
This Image Is Provided By Registered User “warm Life Home”, Copyright Notice Feedback
Tools: Hammer, Button, 3.5mm Punching
Buckle Installation Method:
- First Observe The Components Of The Hidden Button. The Quad Clasp Has Four Small Parts, Which Can Be Divided Into Two Groups Of Bump And Bump.
- Install The Buckle Surface First And Punch Holes On The Leather Surface With A 3.5mm Punch.
- Put The Buckle Surface On The Base And Cover The Leather On The Buckle Surface.
- Install Another Matching Part, And Install It With The Protruding Tool In The Installation Tool Set. Pay Attention To The Flat Position And Do Not Press The Fine Spring Line In The Button, Otherwise, The Whole Part Will Be Scrapped.
- Align The Mold With The Button, Install It, And Beat It With A Hammer. Pay Attention To The Strength And It Is Best To Be In Place At One Time.
- Punch Holes In The Other Leather Block And Prepare To Install The Button On The Other Side.
- Put The Button On The Base, Put The Leather On The Button, And Put The Last Raised Button On It.
- Install The Concave Mold, Align The Mold With The Nail, And Beat It Vigorously With A Hammer. It Is Best To Be In Place Once.
Two, Press The Button How To Dismantle
Tools: Buckle, Diagonal Pliers
Steps:
- We Should Know That Tools Are Very Important. If We Have Only Ordinary Pliers And No Good Skills, We Can Use The Pliers To Clamp The Buttons.
- When We Plan To Break The Button With Pliers, We Must Pay Attention Not To Pull It Too Hard, Otherwise, It Is Easy To Pull The Clothes.
3, But If We Use Diagonal Pliers, It Is More Convenient, As Long As The Flat Mouth Is Attached To The Fabric Of The Clothes, And Then Use The Concave Mouth To Clip Off The Button.
- Diagonal Pliers Are More Efficient Than Ordinary Pliers. If They Are Used By Girls, They Will Be More Relaxed.
How Do You Take The Button Off Your Jeans
The Steps To Unbutton Jeans Are As Follows:
- First Of All, It Is Best To Use A Vice Or Needle-nose Pliers.
- Then Cut It Straight From The Bottom Of The Remaining Bulge.
- One More Tap And The Base Comes Out.
- You Can Buy A New Button And Install It Directly From The Hole.
- If Even The Fabric Is Broken, Install It Next To It.
- Plug The Hole With A Small Decoration At The End Where It Is Often Exposed.
1, Let’s First Look At The Structure And Composition Of The Cowboy Button, Cowboy Button Is Composed Of The Above Button And The Following Two Nails, And The Button Is Composed Of The Button Surface + Button Bottom, From The Bottom Of The Button Can Be Divided Into Active Buttons, Rubber Buttons, Single Insert.
- Find A Pair Of Pliers And Cut Off The Bottom Nails Of The Buttons.
- Once The Bottom Nail Is Cut Off, The Outer Button Will Fall Off Naturally.
Most Of The Buttons On Jeans Are Copper Buttons, Which Are Professional Machines. If You Take Them Down, There Will Be A Small Hole, Which Is Not Very Good. If You Hate Buttons, It Is Recommended To Buy Fewer Buttons When You Buy Them Or Let The Tailor Help You To Take Down The Buttons In Place To Do Some Other Effects.
Most Of The Buttons On The Jeans Are Copper Buttons, Which Are Pushed On By Professional Machines.
To Take The Button Off Is Simple, As Follows:
- With Pliers, Cut The Bottom Nails From The Inside Of The Pants.
- 2, The Bottom Nail Is Off, The Outside Will Fall Off, and The Mouth Of The Tiger Pliers Should Be Sharp.
- 3, The Best, According To Their Own For A Good Looking Can.
- 1, First Look At The Structure And Composition Of The Cowboy Button, As Shown Below: Cowboy Button Is Composed Of The Above Button (a) And The Following Nail (b) Two Parts, And The Button Is Composed Of The Button Surface + Button Bottom, From The Bottom Of The Button Can Be Divided Into Movable Buttons, Rubber Buttons, Single Or Double Buttons.
2, The First To Buy A Good Button Face Down On The Table, And Then The Clothes Need To Nail The Button Position Flat Spread On The Top Of The Button Foot, Pay Attention To The Position Of The Correct, The Clothes Outside Close To The Bottom Of The Button.
3, And Then Take The Nail (also Called Aluminum Foot), Pointing Down At The Bottom Of The Button Position With A Hammer Nail Completely Into The Bottom Of Button Can Be, Pay Attention To Strength, Force Is Easy To Break The Button.
4, If The Jeans Button Is Broken, You Can First Use Pliers Or Scissors To Cut Off The Aluminum Foot Inside The Clothes, And Then Take Down The Whole Button, And Then Nail A New Button.
Take It Off With An Inlay Clip! But There Are Holes! But Jeans Don’t Wear Out Easily! It Should Be Fine!
A Pair Of Sharp Pointed Scissors
Use The Tip Of The Scissors To Cut The Fabric Near The Buckle
Note: It Must Be Very Small
